Das Kran-Forum ist geschlossen!

Kran-Forum » Mobilkrane » reduced outriggers for AC 500? » Threadansicht

Seite: 1
Franklin Thomas


25 Beiträge




Private Nachricht senden
Veröffentlicht 06.10.2005, 22:01 - 000 - in "reduced outriggers for AC 500?" - [485]
Hello everybody,

I need your help again. We have to make a lift study with a Demag AC 500. Due to lack of space we have to rig the crane with reduced outriggers. How wide is the small base for the crane? Also can't find any charts for the reduced basis. Can anyone send me the load charts for it?

Thanks in advance
___

Regards

Franklin

Seitenanfang Seitenende
TDKv
Dienstleister für Kranvermieter
aus Detmold
1101 Beiträge

Admin

Avatar von TDKv
Private Nachricht senden
Veröffentlicht 07.10.2005, 11:23 - 001 - in "reduced outriggers for AC 500?" - [486]
The reduced outrigger basis for the AC 500-1 is 7,303 m in width and 8,037 m in length (center of jack to center of jack).

For which config do you need the charts? Tele, fixed jib or luffing jib? It would be easier to know this because the charts for the reduced basis are very comprehensive. Let me know which one you need and I can give it to you.
___

Carsten Thevessen

Tabellenbücher für Kranvermieter

Vermieter-Map für Kran- & Arbeitsbühnenvermietung
Online-Karte mit mehr als 4500 Vermietern in Deutschland & Europa

Seitenanfang Seitenende
Franklin Thomas


25 Beiträge




Private Nachricht senden
Veröffentlicht 07.10.2005, 17:02 - 002 - in "reduced outriggers for AC 500?" - [493]
Carsten,

You're quick again!

We have to rig the crane with main boom only and I guess 100 tons of cwt. Is it correct that the cwt will swing out of the outrigger area of 7,3 x 8 m?
___

Regards

Franklin

Seitenanfang Seitenende
TDKv
Dienstleister für Kranvermieter
aus Detmold
1101 Beiträge

Admin

Avatar von TDKv
Private Nachricht senden
Veröffentlicht 11.10.2005, 11:15 - 003 - in "reduced outriggers for AC 500?" - [497]

Zitat:
Franklin Thomas postete

We have to rig the crane with main boom only and I guess 100 tons of cwt.

Did sent you a PDF by email.


Zitat:
Is it correct that the cwt will swing out of the outrigger area of 7,3 x 8 m?

Yes, that's correct. The swing radius of the ballast is 6,1 m. So it is approx. 80 cm outside of the outrigger base (center to center). But this should be within the area of the normally used mats.
___

Carsten Thevessen

Tabellenbücher für Kranvermieter

Vermieter-Map für Kran- & Arbeitsbühnenvermietung
Online-Karte mit mehr als 4500 Vermietern in Deutschland & Europa

Seitenanfang Seitenende
Franklin Thomas


25 Beiträge




Private Nachricht senden
Veröffentlicht 18.10.2005, 23:42 - 004 - in "reduced outriggers for AC 500?" - [512]
Hi Carsten,

Thanks for the infos and the charts. It's very useful for us.
___

Regards

Franklin

Seitenanfang Seitenende
 Seite: 1  - [ Mobilkrane ]


Impressum